24 Hours Same Day Emergency Garage Door Repair Service
Your garage door is an important aspect of the protection and safety of your house. Therefore, it is vital to ensure that the overhead doors are always functioning properly, and even when they are malfunctioning, you should know how to find a way out.
More often than not, garage door problems are a culmination of the normal depreciation process. You may manage simple operative issues at home, but knowledge is required. So, without further ado, let us look at the most common problems that often affect Canadian homes.
A garage door opener is a motor-driven mechanism for lowering and lifting a door, to put it simply. An issue with the exterior wiring or the circuit board of the overhead door opener is possible. In such a situation, it is best to immediately call the professionals and seek their expert advice.
While looking at the overhead track of your garage as the door opens or closes, you will notice that rollers are connected to small axles on each side of the floor. The rollers ride in tracks and guide the door up and down. It is common for the rollers to wear out quickly as they are used daily. As such, proper and timely maintenance is the key to ensuring that the rollers function for prolonged periods.
It is essential to remember that when it comes to the wearing out of rollers, there comes the point of no return, wherein the garage door can even stall or jump off the tracks. At this stage, the door may jerk erratically or not open completely, and you will have to call a technician immediately.
Vehicles and the forces of nature are bound to bring in the dirt, mud, and grime inside a garage. Therefore, it is common to see debris buildup in the nooks and crannies of garage doors, which slow down the opening or closing of the door or even halt their functioning altogether. At times, the sensors in the garage door that detect a vehicle’s presence may also be jammed or blocked with dirt, resulting in faulty functioning. Well, a simple cleaning is an answer to fix the problem.
Every garage door track has large springs whose function is to increase the weight-enduring capacity of the door. As such, torsion springs are incredibly powerful, but they are also under constant stress and pressure because their sole job is to support the garage door’s weight and move it steadily along the tracks during opening the door or closing it.
As a result, the springs wear out, lose their strength, or sometimes break into two. A broken torsion spring is a typical problem in old garage doors, and the optimal solution is either professional repair or replacement.
Needless to say, an overhead door track is an integral part of its overall functionality. But, in due course of time and owing to rigorous use, the track may bend or break down. In addition, a noisy track may imply that it needs lubrication and greasing. But, appropriate and timely repair is essential to ensure that the track does not jam up and stops the functioning of the door altogether.
A garage may behave erratically, such as getting opened or closed abruptly, being unable to respond to garage door remote control commands, and so forth. It is a frustrating problem, but often the solution is as simple as cleaning the sensor lens. There are two optimal sensors perched along the rails on each side of the garage door.
The purpose of sensors is to prevent the garage door from closing if the laser beam is broken. Therefore, if anything obstructs the sensor, the opener assumes that something is blocking the door, compelling the door to go back to the open position.
The settings of a garage door limit the degree to which it opens or closes. The door may stay open or close incorrectly if the setting is off. Therefore, resetting the limits option of a garage door is an effective way to fix the garage door. But, if that does not work, do not hesitate to ring the professionals.
To equalize the pressure on the door and maintain a smooth and steady motion, cables are employed in garage door openers. When cables wear down, stretch, or break, the garage door can seem lopsided and clumsy in its movements. A broken cable often causes the garage door to remain partially closed, making the situation quite hazardous for pets or something going under it. Springs and cable problems are very common.
The garage door’s one side may start to sag if the torsion springs are not positioned correctly or are too worn out to maintain tension. The problem occurs because when the door is in locomotion, one side moves faster than the other.
You may sometimes face a situation wherein your garage door refuses to budge. It may happen due to a power surge, a blown-out fuse, or a malfunctioning of the outlet to which the door is connected. You can also examine the circuit breaker or use the reset button on the opener to make the overhead door move again.
So, there we have it, the top ten most common garage door problems. It is essential to know about the different issues that may affect an overhead door to remain prepared during tough times and know what to do when there is a malfunction of your own door.
However, the key is to remain vigilant and opt for regular maintenance and repair services to prolong the life expectancy of your garage door. There is a plethora of garage repair and replacement services in the Edmonton region that can solve all your garage door problems.
Call us at +1 780 340 8564 for garage door repair and maintenance service.
Your email address will not be published. Required fields are marked *
Comment *
Name *
Email *
Website
Save my name, email, and website in this browser for the next time I comment.
Post Comment
