Garage door springs are essential components that counterbalance the weight of garage doors, making them easier to open and close.
WARNING: Garage door broken spring replacement requires professional and safe installation. Because they are under extreme tension. Your health and safety is the first concern. Incorrect installation can cause serious injury
The springs work by supporting the garage door. It controls the door from opening and closing due to the energy applied to it.
Likewise, the springs and cables carry the main garage door weight. While the door opens, the springs’ tension is released, and they create the torque for lifting the garage door.
However, it is essential to keep an eye out for a smooth operation of the garage door. If your garage door opener is facing trouble in functioning, the problem might be the springs
Nowadays, most people pay very little attention to their garage door springs in Edmonton. So, how do I know if my garage door spring is broken? Below are the most common signs of broken springs in a garage door. If you notice any of these, do not delay in calling for immediate garage door repair.
Within the torsion spring system, there are typically two torsion springs. Over time, these springs may break, creating a noticeable gap between them. This serves as a clear indicator that it’s crucial to promptly replace the broken garage door springs.
These springs are responsible for the smooth opening and closing of your garage door with each use. Therefore, it’s essential to stay vigilant about their condition. Contact us in Edmonton for expert replacement of your garage door spring
1. Gap Between Springs
Ideally, the torsion spring system comprises a couple of torsion springs. With time, these springs might break, causing a gap to form in between them. This is a notable sign for you to go for a broken garage door springs replacement immediately.
It is these springs that open and close the door each time you operate your garage door. Hence, you must pay attention to garage door springs. Call us for replacing your garage door spring in Edmonton.
2. Door Seems Heavy
Since the springs and cables carry the weight of a door, things appear to be smooth. In case there is a broken spring, the door tends to become heavy.
If you have been facing problems while opening and closing the garage door then it might be a problem with the springs.
3. Loose Cables
Once your garage door torsion spring is working fine, the cables will be with the correct tension. If they are slack or loose, it means there is a severe issue with the spring, and mostly it is broken.
It is very often that garage door springs break and they can be easily replaced as well.
4. Speedy Fall Of The Garage Door
Because the spring is faulty, it might not be able to carry the door weight. It might not be able to let the door go down slowly. So, when the door closes, it might fall with a bang.
There are 3 common types of garage door springs
1. Torsion Springs
It is the most common type of spring in use for the garage door. They create the torque to lift the door, and they are more durable too. Read more about torsion springs is a great choice compared to torque master or extension springs.
2. Torquemaster springs system
Used for standard garage door and the springs are located inside the shaft for the safety of the door.
In most cases, we are able to convert the torquemaster springs system to the torsion springs system.
3. Extension Springs
This garage spring expands and retracts when you close or open the door.
In most cases, we are able to convert extension springs system to torsion springs system.
Why Does Garage Door Spring Break?
As a smart homeowner, you may know when your garage door needs a broken spring replacement. You may also know how to identify the type of garage door spring and take precautions until help arrives. However, one thing you may not know is the reasons why garage door spring break. Here are three main reasons why they break.
Top Reasons for Garage Door Springs Breaking.
Lack of Maintenance:
when you may be cleaning the car or even the garage floors, when did you last look at the garage door springs? You should take care to check the tracks and even see how the door rolls down without any obstacle. Also, check if the springs are making any noise. If there is, even a minor squeak, use lubricants and try doing the same again. It may be enough to give the oils at least once in six months. Without this minimal care, the springs are sure to break faster.
Rust might be formed on the springs since they are exposed to the environment and made of metal. The rust might pile up and even destroy the coil to break the springs. People often take the garage door broken springs for granted. However, if you do not take care, your garage door won’t work properly. So, keep an eye open, give your overhead door some care, and check for these issues.
Inappropriate Spring Size:
You may be installing a new garage door. However, you should be thorough in your understanding of the best solution for your garage door. If you are using the incorrect size of springs, you might be causing a lot of damage. If you are using only one spring for the door, it might not be enough to support the door weight. Consider the weight and size of the door, and have the springs as per that.
We offer garage door cable repair, garage door service, spring repair and replacement, garage door installation or emergency service. We repair and service all types of residential garage doors and commercial garage doors. Call us for garage door spring repair in Edmonton or surrounding areas.